Update: The below review was of the F2D100, since discontinued. The link above is to the Wolverine F2D, a newer version of same. Wolverine offers several less expensive models as well.

Recently, a relative of ours discovered a box of old slides in his garage that had been sitting, untouched, for many years. The logical thing to do with untouched media is to digitize it. then, not only will it last forever, but it is suddenly accessible. New prints can be made at any drug store without problem, it can be added to digital photo frames, displayed online, shared with relatives, etc.

As a side note, we love the idea of loading decades of photos onto a digital photo frame. It allows your entire album to be visible to you, as opposed to just a select group of pictures using conventional means.

The cheapest professional slide scanning we could find was 27 cents a slide. With several thousand, that would turn out to over $500. Even though it would require work on our part, a slide scanner seemed a more economical option. We never expected professional quality results, but we aren’t blowing up our slides to poster size. For digital photo frames and prints 8×10 or less, it seemed good enough. And sometimes, good enough just is.

We read the reviews of many different slides scanners and decided on the Wolverine Data F2D100 scanner for many reasons. One, it does not require a computer, which allowed it to be set up on a table very easily. Slides are viewed on a tiny screen, then saved to a Secure Digital Card.

Specifications

• 6(H) x 3(W) x 3(D) dimensions in inches
• 5 megapixel CMOS sensor
• Scan Quality: 1,800 DPI – 2520×1680 pixels
• USB powered

Now, we have a simple system for the cleaning of slides prior to scanning. The scanner includes a small brush to clean dust off the backlight in between scans, and you can get slide cleaning supplies. We went with a homebrew solution. A bottle of canned air to blow the dust off the slide and a cheap brush used to clean LCD monitors without scratching them to wipe it off. It isn’t perfect, but both were sitting around our office already.

Below, you can see a sample slide, taken in San Francisco nearly 40 years ago. Click to see full-sized images. You can spot a little dirt still left over, but that could be fixed with a more thorough cleaning of the slides. The first image is exactly as it was when loaded from the scanner. The second is with the picture crapped, and an automatic white balance and color enhance function run on it(as opposed to manual fiddling, which might produce even better results).

Ultimately, the hardest part of the process is the insertion of slides into the slide tray so they can be slid into the scanner. However, Wolverine has replaced the existing tray with one that makes this easier, with a new magnetic lock, as of last month. Unfortunately, we got the old one. We may purchase extra trays anyway, as this would speed the loading process.

Otherwise, this is the perfect item for someone who wants a reasonably decent quality slide scanner.